You are here: Home » Products » Beverage Filling Machine » Carbonated Drink Filling Machine » Carbonated Drink 3-in-1 Filling Machine 3000BPH
Share to:

Carbonated Drink 3-in-1 Filling Machine 3000BPH

The machine is mainly used for filling carbonated drink. It combines rinsing and filling and capping as one automatic body suitable for PET or other plastic bottles. The iso-pressure (iso-barometric) filling technology is adopted enabling it to fill more efficiently and more stably with more output than the machine of the same level from others.

  • DCGF 14-12-4
  • KM
  • 8422301090

Product Description


1.Carbonated drink 3-in-1 filling machine 3000bph uses the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan\'s Mitsubishi, France Schneider, Siemens.

Products Introduction:

Carbonated drink 3-in-1 filling machine 3000BPH is mainly applied for filling drinks. It combines rinsing bottle, filling and capping into one machine. The full procedure is automatics. It is suitable for PET bottle and plastic bottle to fill juice, mineral water, pure water, if add temperature control device, even for hot filling. The adjustment for bottle type of each unit is fulfilled by turning handle; it is simple, easy and quick. The filling method applies new micro pressure filling so that the filling speed becomes more quick and stable. Compared with similar machines, it has higher yield, more benefit. The machine applies advance OMRON programmable controller (PLC) to control machine’s auto-running, the input bottle chain way changes its speed by frequency converter. Cooperate more stable and reliable. As each unit’s running is detected by photoelectric elements. So it has high automation and simple operation. On this basis, changing filling unit can change to low vacuum filling method and isotonic filling method. Low vacuum filling method (Z type machine) is applied for glass bottle to fill alcoholic liquor; soy etc. and the capping method can be aluminum anti-theft cap and plastic cap. The isotonic filling method (D type machine) is applied for PET bottle; plastic bottle to fill CO2 contained drinks. It is the ideal top choice equipment of drinks enterprise.

Containers and specifications

Project Name: 
Full Automatic Complete Carbonated Drink 2000-36000bph Production Line

Carbonated Drink



Filling volume

Filling levelmm

Neck type

PET Bottle

Square or Round Bottle 


Distance from bottle neck 

According request

As request

Adjustable specifications of the bottle type

Middle Mould BaseBottle diameter ≤105mm Bottle Height≤335mm

Customers need to buy additional change-over parts for the different bottles.
If using square bottles, then bottle separating system will be added.

Juice Preparation

Fruit , Concentrate, Powder mixing .....

Container Label & Control Mode

Packaging system

Palletizing system


Hot Melt Roll-Fed

PVC Shrink Label

Full Label/ Half Label 

Manual / Automatic

Packing system

Min, Spec.


Low position gantry palletizer

Robot Palletizer

High position gantry palletizer

Single Arm Palletizer 

Manual Palletizer 


Film shrinker

Wrap Around packer 

Robert Packing Machine 






User Ambient Conditions

Temperature1040℃HumidityNo dew

User Electrical Supply Specification



Washing heads.

<1>Into bottle way is air conveyor direct connection with Bottle dial .

<2>All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean .
<3>304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
<4> 304/316 stainless steel washing pump make the machine more durable .


Filling heads.

<1> 304/316 Stainless steel high precision filling nozzle
<2> Filling volume adjustable in fine rank, same liquid level after filling
<3> All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
<4> 304/316 stainless steel filling pump

<5>Efficient spray nozzle rinse thoroughly and save water for flushing


Capping heads.

<1> Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
<2> All 304/316 stainless steel construction
<3> No bottle no capping
<4> Automatic stop when lack of bottle

<5>Capping effect is stable and reliable Defective rate ≤0.2.

Technical parameter:







Rinsing head






Filling head






Capping head






Power of main motor

3 kw

3 kw

3 kw

4 kw

 4.8 kw

Total weight

2.8 T

3.2 T

3.6 T

4.5 T

4.8 T







Bottle diameter






Bottle height






Method of changing speed

Frequency conversion

Frequency conversion

Frequency conversion

Frequency conversion

Frequency conversion

Power of unscramble motor

0.37 kw

0.37 kw

0.37 kw

0.37 kw

0.37 kw

Supply presure of rinsing water






Photos for Machine:

Carbonated Beverage Filling Line.jpg

Carbonated Drinks Filling Machine.jpg

carbonated drink production flowchart.jpg



 Q:How about the spare parts?
A:We will send one year enough easy broken spare parts together with the machines,shipping together.During the warranty time,we will supply the spare parts with our cost including the delivery fees.
Q:How long time for installation?
A:According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.
Q:How to install my machines when it arrives?how much the cost?
A:We will send our engineers to your factory to install the machines and train your staff how to operate the machines.Customer pay air tickets go and back,accommodation and USD80/day/person.
Q:When can I get my machine after I paid?
A:Normally production time is around 30-60days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
Q:What’s your guarantee or the warranty of the quality if we buy your machines?
A:We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q:Are you a trading company or a manufacturer?
A:We are an Original Equipment Manufacturer so that we can provide you high quality machines in raeasonable price, Welcome to visit us.
King Machine solutions        2008-2018  Zhangjiagang King Machine Co., Ltd.  All rights reserved.  Iwonder    Link: Alibaba  Made-in-China   Sitemap  Privacy Policy