You are here: Home » Product List » Bottle Blowing Machine » Fully automatic extrusion blow moulding machine(single station) JMX50S
Fully automatic extrusion blow moulding machine(single station) JMX50S
|
- Model: JMX50S
Product Description:Clamping system: Fixed two-way translation module structure
Extruding system: hard gear box + Delta inverter
Die system: Storage die
Hydraulic system: Yuken hydraulic valve / oil pump + electric hydraulic proportion control
Circuit system: Mitsubishi PLC + man - and - computer interface + Temperature - controlled module
Extruding system: hard gear box + Delta inverter
Die system: Storage die
Hydraulic system: Yuken hydraulic valve / oil pump + electric hydraulic proportion control
Circuit system: Mitsubishi PLC + man - and - computer interface + Temperature - controlled module
Technique parameter:
| Max.Product Volume | (L) | 2.5 |
| Dry Cycle |
(PC/h) |
1500 |
| Screw Diameter | (mm) | 50 |
| Screw L/D ratio | (L/D) | 24-30 |
| Screw drive power | (KW) | 11-15 |
| Srew heating capacity | (KW) | 7.8-8.5 |
| Output of HDPE | (kg/h) | 30-35 |
| Oil pump drive power | (KW) | 5.5 |
| Clamping force | (KN) | 35 |
| Platen distance | (mm) | 138-368 |
| Max.Die diameter | (mm) | 90 |
| Central distance of bi-die | (mm) | 110-130 |
| Max.Die diameter (Bi-die) | (mm) | 55 |
| Central distance of three-die | (mm) | 80-110 |
| Max.Die diameter (Three-die) | (mm) | 40 |
| Central distance of four-die | (mm) | 60-85 |
| Max.Die diameter (four-die) | (mm) | 25 |
| The Average Consumption | (kw/h) | 12.5 |
| Blowing pressure | (Mpa) | 0.6 |
| Air volume | (M3/MIN) | 0.4 |
| Cooling water pressure | (Mpa) | 0.2-0.3 |
| Water consumption | (L/MIN) | 30 |
| Size of machine | (L*M*H)/m | 2.8*1.8*2.3 |
| Weight of machine | (TON) | 3.0 |
Relate products
|
|
|
|
|