Mobile/Whatsapp: +86 15262329811

Electro-deionization EDI Water Treatment System
You are here: Home » Products » Water Treatment Plants » Electro-deionization EDI Water Treatment System
Share to:

Electro-deionization EDI Water Treatment System

Reverse Osmosis Machine System.The main equipment ofare silica sand filter, active carbon filter, sodium ion exchanger, hollow fiber, RO( reverse osmosis), UV sterilizer, precision filter, ozone generator, water tank etc. The treatment capacity is 0.5-50 ton/hour. It can effectively get rid of muddy organic matter, iron, manganese and oxide, filter suspended substance, colloid, remained oxygen of microorganism and some of heavy metal ion in the water, reduce the hardness of the water to make all specifications of the water quality fully meet the state fresh water standard of fresh drink water.

Quantity:
  • SCL
  • KM
  • 8421219990

Product Description

Porduct name:EDI(Electro-deionization) Water Treatment System

EDI Water Treatment Machine

Electric desalination is actually the addition of resin to the desalting compartment of the electrodialyzed anion and cation membrane compartments as a desalting compartment. Applying DC current across the stack creates a potential difference that moves the cations in the raw water toward the cathode and through the anode, moving the anions toward the anode and through the membrane, allowing the anions and cations to enter the concentrating chamber with concentrated water. Drain. As the water resistivity of the desalting compartment increases, the polarization occurs in the near-film layer, and the water is ionized and decomposed into H+ and OH-. The resin in the desalting compartment is often in a regenerated state, and the ion exchange resin which realizes continuous deep desalination filling is a kind. The special high conductivity resin has a much higher conductivity than the low concentration water. The resin particles continuously undergo ion exchange to form an ion channel, which increases the conductivity of the deionization chamber, thereby weakening the polarization phenomenon of the electrodialyzer and increasing the limiting current of the electrodialyzer, that is, improving the desalination capacity. The addition of resin to the desalting compartment increases the agitation of the water stream, promotes ion diffusion, increases the conductivity of the desalting compartment, increases the limiting current density and current efficiency, and contributes to deep desalination. When the operating current of the EDI device exceeds the limiting current, the interface layer near the membrane and the resin will be polarized, and hydrolysis will produce OH- and H+, which will regenerate the resin. During the operation of the EDI equipment, the salt in the water is desalted by electrodialysis and desalted by exchange of cation and cation resins. The water quality is deteriorated due to resin regeneration. High quality pure water can be produced by selecting appropriate conditions after commissioning.
The EDI equipment uses electric regenerated resin instead of acid-base regeneration, which can replace the mixed ion exchanger. The effluent water quality can reach 18MΩ.cm (25oC), and the SiO2 and TOC removal rate is high.

EDI Water Treatment MachineEDI equipment mainly includes
Booster pump
EDI film block
EDI power controller
Diaphragm pressure gauge
Flow meter
Resistance meter
Connecting pipe valve
frame
EDI Water Treatment Machine

FAQ

Q:How about the spare parts?
A:We will send one year enough easy broken spare parts together with the machines,shipping together.During the warranty time,we will supply the spare parts with our cost including the delivery fees.
          
Q:How long time for installation?
A:According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.
          
Q:How to install my machines when it arrives?how much the cost?
A:We will send our engineers to your factory to install the machines and train your staff how to operate the machines.Customer pay air tickets go and back,accommodation and USD80/day/person.
          
Q:When can I get my machine after I paid?
A:Normally production time is around 30-60days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
          
Q:What’s your guarantee or the warranty of the quality if we buy your machines?
A:We offer you high quality machines with 1 year guarantee and supply life-long technical support.
          
Q:Are you a trading company or a manufacturer?
A:We are an Original Equipment Manufacturer so that we can provide you high quality machines in raeasonable price, Welcome to visit us.

content is empty!

Follow us:

Contact King Machine

For any general inquiries, please fill in the following contact form.
Mobile / Whatsapp / Wechat:+86 15262329811
Email:edison@king-machine.com
Facebook: m.me/joycexuchina

King Machine solutions        2020  Zhangjiagang King Machine Co., Ltd.  All rights reserved.  Iwonder    Link: Alibaba  Made-in-China   Sitemap  Privacy Policy