King Machine Helped Shnider Upgrade Its Carbonated Can Filling Production Line in Egypt

Customer Background

 Every June, King Machine exhibits at Propak Egypt – the region’s key event for beverage filling technology. In 2025, our sales engineer Anna connected with Shnider, a well‑established Egyptian beverage producer, at the show. Shnider was actively looking for a reliable can‑filling line to replace their aging equipment.

Challenges Faced by the Customer 

After detailed discussions with the Shnider team, three major production challenges were identified:

Inconsistent Liquid Levels

The existing filling system struggled to maintain consistent fill volumes, resulting in product variation and occasional overfilling.

Excessive Foaming During Filling 

Foaming was a frequent issue during carbonated beverage production, causing interruptions, product loss, and reduced line efficiency.

Short Seaming Head Service Life

The seaming heads required frequent replacement due to wear, increasing maintenance costs and unplanned downtime.

To address these issues, Shnider required a 10,000 cans per hour carbonated soft drink filling line that could deliver stable production while minimizing maintenance requirements.

Why they chose King Machine

Anna highlighted our core strengths:

Precise liquid‑level control – our multi‑stage filling valves deliver consistent fills without overflows.

Anti‑foam technology – a patented counter‑pressure system virtually eliminates foam‑related downtime.

High‑precision seaming – tolerance down to 0.02 mm ensures leak‑free seals every time.

Titanium‑coated seaming heads – significantly longer wear life (over 24 months vs. 8‑12 months for standard heads) – a clear cost advantage.

Local support in Egypt – our in‑country engineers can be on‑site within 24 hours, minimising production stops.

In addition, Anna shared several successful beverage filling projects previously completed in Egypt, providing valuable references that strengthened the customer’s confidence in our equipment and service capabilities.

Following technical evaluations and project discussions, Shnider decided to place an order for a complete 10,000 CPH carbonated can filling line.

Installation and Production Performance

Following installation and commissioning, the production line was successfully put into operation.

The system quickly demonstrated stable performance in daily production, helping the customer achieve higher efficiency, improved product consistency, and lower maintenance requirements.

The project validated King Machine’s ability to provide reliable carbonated drink filling machine solutions tailored to the needs of beverage manufacturers in the Middle East and Africa.

Follow-Up Visit in 2026

When Anna visited Shnider’s factory after Propak Egypt 2026, the feedback was overwhelmingly positive. The line had been running smoothly for months – filling accuracy was spot‑on, foaming issues were gone, seaming quality was flawless, and OEE had improved by 15%. The titanium‑coated heads showed minimal wear, and the maintenance team was impressed.

Looking Forward

We sincerely thank Shnider for placing its trust in King Machine.

This successful cooperation demonstrates how the right technology, combined with responsive local service, can help beverage manufacturers overcome production challenges and achieve sustainable growth.

As a leading beverage filling machine manufacturer, King Machine continues to provide advanced solutions for water, juice, carbonated soft drinks, beer, and other beverage applications worldwide.

If you are looking for a reliable can beverage filling machine or a complete carbonated soft drink filling line, our team would be pleased to discuss the most suitable solution for your production needs.