DCGF60-60-15 washing,filling capping 3in1 machine is mainly used in the Equal pressure filling operations. The three functions of bottle rinsing, filling and capping are composed in one body of the machine. The whole process is automatic. The machine is used in filling carbonated beverage in bottles made of polyester and plastics.The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles. . Therefore the output and benefit of the machine is higher than the machines of the same specifications. The advanced Mitsubishi programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably . It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity
Introduction:
Carbonated soft drink 3-in-1 filling machine 24000BPH is mainly used in the Equal pressure filling operations. The three functions of bottle rinsing, filling and capping are composed in one body of the machine. The whole process is automatic. The machine is used in filling carbonated beverage in bottles made of polyester and plastics.The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles. . Therefore the output and benefit of the machine is higher than the machines of the same specifications. The advanced Mitsubishi programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably . It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity,it is the best choice for the beverage plant
Containers and specifications | ||||
Project Name: | Carbonated Drink | |||
Material | Shape | Filling volume | Filling level（mm） | Neck type |
PET Bottle | Square or Round Bottle | 100-2000ml | Distance from bottle neck According request | As request |
Adjustable specifications of the bottle type | 【Middle Mould Base】Bottle diameter ≤105mm Bottle Height≤335mm | |||
Customers need to buy additional change-over parts for the different bottles. | ||||
Juice Preparation | Fruit , Concentrate, Powder mixing ..... | |||
Container Label & Control Mode | Packaging system | Palletizing system | ||
Hot Melt Roll-Fed PVC Shrink Label Full Label/ Half Label Manual / Automatic | Packing system | Min, Spec. | Manual Low position gantry palletizer Robot Palletizer High position gantry palletizer Single Arm Palletizer Manual Palletizer | |
Manual Film shrinker Wrap Around packer Robert Packing Machine | 1*2 2*3 3*4 4*6 3*5 | |||
User Ambient Conditions | Temperature：10～40℃；Humidity：No dew | |||
User Electrical Supply Specification | Voltage：380V±5%， 3phase； Frequency：50HZ±1% | |||
Technical paramter:
| Number of washing positions | 60 |
| Number of filling positions | 60 |
| Number of capping positions | 15 |
| Capacity based on 500ml | 20000-24000bottles/hour |
| Suitable bottle height (mm) | 160-340 |
| Suitable bottle diameter (mm) | ¢50-¢90 |
| Power of main motor (KW) | 10kw |
| Water pressure (Mpa) | 0.25-0.3Mpa |
| Filling type | Equal pressure |
| Filling temperature | 3~4 degree |
| Shape dimension | 6500MM*2450MM*2800MM |
| Weight | 11500kg |
| Suitable bottle | PET bottle with screw cap |
Photos for Machine:
